Procedures for electric eye operation – Canon DS-8 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Procedures for Electric Eye Operation
■j Load and check the power level of the batteries. (Pages 7-8)
2
Adjust the eyepiece to your eyesight. (Page 8)
3
Set the master switch at “AUTO". (Page 9)
4
Load the Double Super 8 film. (Pages 22-24)
5
Set the film speed dial. (Page 9)
6
Set the filming speed at 18 fps. (Pages 9-10)
Set the variable shutter control lever at “OPEN". (Page 17)
8
Look through the viewfinder, focus at telephoto, and decide the
composition of the picture. (Pages 12-14)
9
Press the shutter release button slightly and check the position
of the exposure indicator. (Page 14)
10
start shooting by depressing the shutter release button all the
way down. Zoom in and zoom out according to your needs.
(Page 15)