Canon EOS 3000 N - Manual (Page 17)

installing the Batteries and Checking the Battery Level
Checking the Battery Level
Check the battery level after replacing the batteries and before using the
camera.
Turn the Command Dial to a
shooting mode.
* The camera will then turn on and the
LCD panel will display one of the
following battery level icons:
Battery level OK.
The battery level is low. Keep
spare batteries handy.
The batteries will soon be
completely exhausted.
Replace the batteries.
(->page 7)
«
iZ5
■a
■iZJ-
Battery Life (With 24-ex. rolls)
Temperature 0% Flash Use 50% Flash Use 100% Flash Use
At 20“C 85 rolls 35 rolls 17 rolls
At-10”C 60 rolls 25 rolls 12 roils
The Battery Life table above is based on Canon’s testing conditions using
an EF 50mm f/1.4 USM lens and new batteries.
^ o If nothing is displayed on the LCD panel, the batteries may have been installed
incorrectly. Take out the batteries and install correctly, (-^page 16)
' Pressing the shutter button halfway for a prolonged period or operating only the
autofocus without taking a picture will still consume battery power. It will reduce
the number of rolls that can be taken with the batteries.
iJ When not using the camera, set the Command Dial to < dSi >.
17