Bulb exposures, Turn the command dial to <m, Start the bulb exposure – Canon EOS 3000 N User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bulb Exposures
A bulb exposure starts when you press the shutter button completely and
ends when you release the shutter button. Bulb exposures are useful when
long exposures are required for night scenes, fireworks, astronomical
photography, etc.
Turn the Command
Dial
to <M>.
Set the shutter speed to
b u i b ■
® Turn the
dial until
“ b u L b ”
is
displayed on the LCD panel.
»
“ b u i b ”
follows “3G"”.
Press and hold down the
button and turn the dial to
set the desired aperture.
Start the bulb exposure.
• Press and hold down the shutter
button.
► During the bulb exposure, “
b u i b
blinks on the LCD panel.
• The bulb exposure continues as long
as you hold down the shutter button.
Remote Switch RS-60E3 (optional) is recommended for bulb exposures.
With a new set of batteries, the maximum bulb exposure time (at 20°C) will be
about 6 hours.
55