Check the viewfinder display and take the picture – Canon EOS 3000 N User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Av Aperture-Priority AE
iC - ]
Press the shutter button halfway
to focus the subject.
► The shutter speed is set
automatically.
Check the viewfinder display and
take the picture.
® If the shutter speed display does not
blink, a correct exposure will be
obtained.
o
If the slowest shutter speed blinks, it
indicates underexposure. In such a case,
turn the
dial to set a larger
aperture (smaller f-number) until the
shutter speed display stops blinking.
If the maximum shutter speed blinks, it
indicates overexposure. In such a case,
turn the
dial to set a smaller
aperture (larger f-number) until the shutter
speed display stops blinking.
ii Aperture Display
The aperture can be set and displayed in full and half stops as shown below.
The larger the number, the smaller the aperture opening will be. The displayable
range of apertures depends on the lens mounted on the camera.
< n
i.U
i o
(.0
J n
c . u
¿5
/.S'
5.1
8.G
3.5
/ /
/3 IS
if no lens is mounted.on the camera, “OD
setting.
5.5
8.8
3.5
H.D S.5
15
88
81
38
will be displayed for the aperture
47