Canon EOS 3000 N - Manual (Page 57)

0 Multiple Exposures / Silencing the Beeper
® If you shoot multiple exposures on the first few or last few frames of roll, the
multiple exposures might not be precisely aligned due to the film advance
mechanism’s characteristics.
ul » During multiple-exposure shooting, the < ^ > arrow next to the <0> icon on
the LCD panel will blink.
■> To cancel multiple exposures before shooting, set the number of multiple
exposures to 1.
* To cancel multiple exposures after shooting, follow steps 1 and 2 to set the
number of multiple exposures to blank.
Since shooting multiple exposures will expose the same frame multiple times,
negative exposure compensation (-^page 52) must first be set to avoid
overexposure.
General Guide for Exposure Compensation
Multiple Exposures 2 exposures 3 exposures 4 exposures
Exposure Compensation Amount -1.0 stop -1.5 stop -2.0 stop
These are only suggested exposure compensation amounts. The optimum
amount depends on the scene. Experiment to find the optimum compensation
amount.
!
■»)) Silencing the Beeper
The beeper can be silenced in all cf the sheeting medes.
Move the <►> arrow to the <*0)>
icon.
• Lcck at the LCD panel and press the
<FUNC. > butten. ((2)6)
Set the setting to “ 0
® Turn the dial.
» Tc enable the beeper tc scund, set tc
i i I ’’
r
* Press the shutter butten halfway tc
return tc ncrmal camera cperaticn.
57