Take the picture – Canon EOS 3000 N User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
P Program AE
Take the picture.
• Compose the shot and press the
shutter button completely.
The Difference
Between <P>
and
<D>
• The <P> and <0> modes set the same shutter speed and aperture
settings automatically for picture-taking.
• The following features can be used with <P>, but not with <0>:
Continuous shooting
Manual focusing point selection
Program shift
AE lock with the <*> button
Exposure compensation
AEB
Multiple exposures
Built-in flash ON/OFF
EX-series Speedlite compatibility
- Fligh-speed sync
- FE lock
I
About Program Shift
In the Program AE mode, you can freely change the shutter speed and
aperture combination (program) set by the camera while retaining the same
exposure. This is called program shift.
To shift the program, press the shutter button halfway and turn the </^>
dial until the desired shutter speed or aperture is displayed.
® After the picture is taken with the shifted program, the shifted program is
canceled automatically and the original program is restored.
® Program shift cannot be set when the built-in flash is used.
43