Eedselecting an af point, E3 selecting an af point – Canon 3000 V User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EEDSelecting an AF point
The AF point is used for focusing. The AF point can be selected
automatically by the camera or manually by you. In the Basic Zone
modes and
<A-DEP>
mode, the AF point selection is automatic only.
In the
<P>
<Tv> <Av> <M>
modes, the AF point can be
selected either automatically or manually.
• Automatic AF point Selection
The camera selects the AF point automatically according to
situation.
• Manual AF point Selection
You can select any of the seven AF points manually. This is best
when you want to be sure to focus on a particular subject, or to
compose a particular shot quickly.
•
Press the <EB> button. (S6)
► The current AF point will be
indicated on the LCD panel and in
the viewfinder.
Select the desired AF point.
• While looking at the LCD panel or
viewfinder, turn the
<iSh>
dial.
• After selecting the AF point, press
the shutter button halfway. The
camera will then be ready to take
pictures.
Automatic AF
Manual AF
Point Selection r ----------------------- Point Selection -----------------------------------
1
:«c ■
¡i
Q
28