A-dep automatic depth-of-field ae, A-dep automatic depth-ot-field ae – Canon 3000 V User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A-DEP Automatic Depth-of-Field AE
This mode is for obtaining a wide depth of fieid automaticaiiy
between a near subject and far subject. It is effective for group
photos and landscapes.
The camera uses the 7 AF points to detect the nearest and farthest
subjects to be in focus.
» <A-DEP> stands for Auto-depth of field.
Turn the Mode Dial to <A-DEP>.
Focus the subject.
• Move the AF point over the subject
and press the shutter button
halfway.
• Focus is achieved at all the AF
point marks that light.
Take the picture.
The
<A*
•
DEP>
mode cannot be used if the lens' focus mode switch is
set to
<MF>.
a
‘ If the aperture value blinks, it indicates that the exposure level is
correct but the desired depth of field cannot be achieved. Either
use a wide-angle lens or move further away from the subjects.
‘ In this shooting mode, you cannot freely change the shutter speed
and aperture value. If the camera sets a slow shutter speed, hold
the camera steady or use a tripod.
> If flash is used, the result will be the same as using flash in the
<P>
mode.
37