Canon 3000 V - Manual (Page 39)

%Auto Exposure Bracketing (AEB)
mb
With AEB, the camera automatically changes the exposure within the set
range (up to +/-2 stops in 1/2-stop increments) for three successive frames
AEB amount
i ^
(0
AEB range -
standard exposure
decreased exposure
increased exposure
Ш
Move the <^> arrow to the
<^> icon.
• Look at the LCD panel and press
the <FL)NC.> button ((56)
Set the desired AEB amount.
' • Turn the <fS> dial.
• Press the shutter button haltway to
return to normal camera operation.
Take the picture.
► The three bracketed shots will be
exposed in the following sequence:
standard exposure, decreased
exposure, and increased exposure.
► As shown on the left, the respective
bracketing amount will be displayed
as each bracketed shot is taken.
• The picture will be taken in the
current film advance mode.
• After the three AEB shots are
taken, the AEB will not be canceled
automatically. To cancel AEB, set
the AEB amount back to “ nO”.
• During AEB shooting, the <^> arrow will appear next to the
<%> Icon and the AEB level <■ > will be displayed. In the
viewfinder, the <•)(■ > icon will blink.
• In the <Q! i > film advance mode, the camera stops shooting
automatically after taking the three AEB shots. In the <□> (single
frame) mode, press the shutter button completely three times to
take the three AEB shots.
• If you use the self-timer or remote control, the three AEB shots
will be taken continuously automatically.
• AEB can be combined with exposure compensation.
• AEB cannot be used with flash or bulb exposures.
39