Stroboscopic flash with a slave unit – Canon 550EX User Manual
Page 111
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
2. Stroboscopic Flash With a Slave Unit
OZoom ¿Smm
€^0©
0-> < rVi
jQ____ ¡Ffm^
While
M
is blinking, press the
<MODE>
button.
M
ulti
will then
start blinking.
To set the stroboscopic flash, see
page 95.
Q To determine the proper exposure, take test shots and experiment.
41
Pressing the <MO№> button whiie Mticri is blinking will cancel the slave unit’s
independent setting. Set it back to an independent setting.
An independent setting is retained even after the siave unit’s main switch is set to O.
* When the main switch is set to
I
again, the independent setting takes effect.
111
Advertising