Sc s.e, C press the <sel/set> button, Focus the subject – Canon 550EX User Manual

Page 94

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Manual Flash Mode

5umm

-J/H~

1

0 S 0 7 1 1 S 2

3 4 6 9 1 3 I B r

____

Q-> I

rSE

ni ^"8 CrrnTT?>

Press the <+> or <—> button to set

the desired flash output.

• Each time the button is pressed, the flash

output changes by one stop.

C Press the <SEL/SET> button

^

again. The manual flash output

display will stop blinking and remain

displayed.

0

Focus the subject.

• When you press the shutter button halfway,

focus will be achieved and the aperture and
flash range (bar segment) will be displayed
on the LCD panel

0.S 0.7 1 1.1 2

3 4

> 8 13 ig

“7

Check the focusing distance on the

' lens.

Q Check the flash range on the LCD

^ panel. If the flash range does not

match the focusing distance, change

the aperture until It does match.

• You can also change the flash output until

the flash range matches the focusing
distance.

SC S.E \

Check that the i icon is displayed in
the viewfinder, then take the picture.

• If there is a iarge difference between the flash range and focusing distance, change

■'Jll'' the flash output or use a larger aperture until they match.

• To obtain a more precise flash exposure, use a hand-held flash meter

94

Advertising