Feb (flash exposure bracketing), Press the <sel/set > button and select, Focus the subject – Canon 550EX User Manual
Page 88
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
With FEB, you can obtain bracketed flash shots of the subject while the
background exposure level remains the same. Three bracketed flash shots
can be taken: Correct exposure, underexposure, and overexposure. The
three shots can be bracketed up to ±3 stops in 1/3-stop increments (or 1/2-
stop increments with some cameras). After all three bracketed flash shots are
taken, FEB is canceled automatically.
2. FEB (Flash Exposure Bracketing)
c n
TJil^ \l/ Zoom bumm
N
t
L n C
/|N /|\
UM 1 f'* I >
PILOT
rT)
rh
—
SEL/SE7 ZOOM
1
Press the <SEL/SET > button and
select %.
• Pressing the
<SEL/SET
> button changes
the blinking setting in the following loop:
The % icon and flash exposure bracketing
display will blink-
If the
0S
Icon appears, press the
<SEL/SET
> button again.
O Press the <-F> or < —> button to set
^ the flash exposure bracketing
amount.
Press the <SEL/SET > button.
• The 550EX’s LCD panel display will be
similar to the figure on the left.
Focus the subject.
• When the shutter button is pressed halfway,
the tc icon will be displayed on the
viewfinder bottom
88