Using the wide panel – Canon 550EX User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Using the Wide Panel
Using the Zoom Button and Wide Panei
Pull out the built-in wide panel and flip it
down to cover the flash head. The flash
head’s zoom setting will be set to 17mm
automatically.
• Using the wide panel disables the
<ZOOM>
button
• Use the wide panel with flash head at the normal
or
T
downward tilt position.
• If the built-in wide panel is used and the flash head is turned or tilted for bounce flash,
the flash result may look uneven. The LCD panel display will blink as a warning.
• Do not pull out the wide panel too hard. Otherwise, the wide panel may come off.
If the wide panel comes off, the
<ZOOM>
button will not work. If this
happens, follow the procedure below.
• Use your linger to push in the panel as
shown by the arrow
• The
<ZOOM>
button will work again,
but the entire LCD panel display will
keep blinking Take the Speedlite to the
nearest Canon Service Center tor
repair
20