Feb (flash exposure bracketing), I-------- ♦'e, Press the <sel/set> button and select – Canon 550EX User Manual
Page 38: Focus the subject
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. FEB (Flash Exposure Bracketing)
With FEB, you can obtain bracketed flash shots of the subject while the
background exposure level remains the same. Three bracketed flash shots
can be taken; Correct exposure, underexposure, and overexposure. The
three shots can be bracketed up to ±3 stops in 1/3-stop increments (or 1/2-
stop increments with some cameras). After all three bracketed flash shots are
taken, FEB is canceled automatically.
ETSri/- \ Izbrfo» Sun
-%- ( 1/3 -
^/|\ / I I \
Press the <SEL/SET> button and
select %.
• Pressing the
<SEL/SET
> button changes
the blinking setting in the following loop:
I-------- ♦'E--------------------------- 1
-(Off)-
• The % icon and flash exposure bracketing
display will blink.
•
If the HI Icon appears, press the
<SEL/SET
> button again
Press the <-!-> or <-> button to set
the flash exposure bracketing
amount.
0 Press the <SEL/SET > button.
4
The SSOEX's LCD panel display will be
similar to the figure on the left.
Focus the subject.
• When the shutter button is pressed halfway,
the FEB setting is displayed on the
viewfinder's right.
38