How to charge the battery – Canon SCOOPIC 16 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
An exclusive type 12 v nickel cadmium recharge
able battery is used in the Scoopic 16 as the
pow/er source for film drive and electric eye. The
camera functions only when this charged battery
is properly loaded. A fully charged battery will
provide power for driving eight reels of 100-foot
(30.5-meter) length film at 24 frames per second.
#Since this battery is not charged when you
purchase it, be sure to charge the battery before
loading it into the camera.
Canon Scoopic Battery Charger-S
The exclusive Battery Charger-S is used for charg
ing the nickel cadmium battery. Each battery
can be charged simultaneously either in a pair or
singly.
I
Set the voltage switch according to the voltage
to be used. For example, in a locale where
the household voltage is 220 v, set the voltage
switch at 200-240 v.
#Be very careful not to make a mistake on the
voltage setting.
2
Insert the battery after matching the + and
— markings on the battery with those on the
charger.
How to Charge the Battery