Manual control of aperture, Auto – Canon SCOOPIC 16 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Observe the following procedures when shooting
with manually controlled aperture.
I
Set the master switch at “MANU.”. The letter
“M" will appear in the upper part of the view
finder.
2
Turn the aperture control ring and set the
exposure meter needle inside the viewfinder to
the desired f/stop.
4 The aperture control ring moves only when the
master switch is set at "MANU.”.
Manual Control of Aperture
AUTO
' V
Advertising