Canon SCOOPIC 16 User Manual

Page 49

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising

Bend the tip of the film leader towards the

emulsion side and insert into the take-up spool

as indicated by the diagram inside the camera.

Wind the film leader tightly 3 or 4 times around
the spool.

Place the take-up spool on the take-up spool

shaft.

4 Be sure to check that the pressure plate and

the film holder are in the normal positions and the
knobs are dropped in. (See the picture in the

following page.)

Advertising