AVer SPC300+ - Manual (Page 16)

E-10
Name Button Function
(10) PIP Display a thumbnail of the captured image from the memory
source at the corner of the screen while in camera mode.
Use the ◄ or ► buttons to move to the previous or next
image. To move the thumbnail mini preview screen to
different corners, press the PIP button again.
To increase or decrease the live image from the SPC
camera, use the zoom +/-.
(11) SD/MEM Select the memory source between SD card or built-in
memory.
(12) MENU Pull up and exit the OSD main-menu and sub-menu.
(13) AF Automatically adjust the focus.
(14) FOCUS U / V Adjust the focus manually.
(15) ZOOM +/ - - Zoom in and out the image 8X digitally in Playback and
Box mode.
- Zoom in and out the image optically and digitally in
Camera mode.
The image may appear blurry when optically zooming the image in and out. After achieving
the desired magnification, the camera automatically adjusts the focus and the image will
become clear again.
(16) ZOOM RESET Return to normal view (1x).
(17) ▲ ,▼, ◄, ►,
& ENTER
Use these buttons in Playback, Box, Pointer, Visor, Resize,
Split Screen, PIP function, and Menu to make a selection
and adjustment (See Menu Functions, for more details).
(18) CAPTURE Capture a still image. The captured image is saved in the
memory source at 1024 x 768 resolution.
(19) DELETE Remove the selected picture permanently in Playback
mode.
(20) TIMER Display, start and hide the on-screen display timer. The
timer display can be toggled to show or hide when the timer
countdown has started (See Timer Function for more
details). To reset the timer, press and hold down TIMER
button.
(21) FREEZE Toggle to pause and resume the image from SPC300 built-
in CMOS camera.
(22) FULL
SCREEN
View the selected thumbnail captured image on the entire
screen in Playback, Split Screen or PIP mode.
(23) ROTATE Turn the image by 90° each time this button is pressed in
camera mode.
(24) SHADE - Change the covered area of the Visor to semi-
transparent or opaque.
- Change the outer side of the Box to semi-transparent,
opaque, or transparent.