AVer SPC300+ - Manual (Page 22)

E-16
OSD Menu Description
BRIGHTNESS
-50 0 50
BRIGHTNESS :
Press ►or◄ buttons to increase or decrease the brightness level
and improve the visibility of the image. The brightness level can be
set up to ±50.
CONTRAST
-50 0 50
CONTRAST :
Press ►or◄ buttons to emphasize or reduce the difference between
light and dark conditions. The contrast level can be adjustable up to
±50.
TIMER
PRESENTATION
SLIDE SHOW
TIMER :
Use ▲or▼ buttons to select presetting the presentation timer or slide
show time interval.
PRESENTATION
0 0
MIN
120
PRESENTATION :
Press ►or◄ buttons to set a time value. The presentation timer
value can be set up to 120 minutes (See Timer Function for more
details).
SLIDE SHOW
1 5
SEC
10
SLIDE SHOW :
Press ►or◄ buttons to set a time interval value. The slide show time
interval can be set up to 10 seconds.
RESOLUTION
1024 X 768
800 X 600
640 X 480
RESOLUTION :
Use ▲or▼ buttons to choose from 1024x768, 800x600 or 640x480
display resolution then press ENTER to make the selection. This is
available only for RGB and DVI-I video output.
LANGUAGE
ENGLISH
ESPAÑOL
日本語
繁體中文
LANGUAGE :
Use ▲or▼ buttons to select from different languages then press
ENTER to make the selection.
MEMORY
SOURCE
FORMAT
MEMORY :
Use ▲or▼ buttons to select the memory source on where to store or
view the image.
SOURCE
EMBEDDED
SD
SOURCE :
Use ▲or▼ buttons to select the memory source either from the SPC300
built-in memory (embedded) or SD card.
FORMAT
NO
YES
FORMAT :
Use ▲or▼ to select NO to exit or YES to format and delete all the data
in the memory source then press ENTER. The message “FORMAT” will
appear then the process is finished.
USB CONNECTION
USB CAMERA
MASS STORAGE
USB SELECT :
Use ▲or▼ buttons to select the USB function between USB Camera or
Mass Storage.
• USB Camera - can be used as a computer webcam or with our
bundled software as video recorder and capture still image.
• Mass Storage - transfer the captured images to and from the memory
source and computer hard disk.
DEFAULT
NO
YES
DEFAULT :
Use ▲or▼ buttons to select YES to restore to original factory default
setting or NO to keep the current setting.
MENU
SLIDE SHOW
MEMORY SOURCE
DELETE
PLAYBACK MENU :
Press MENU when you are in Playback mode then use the ▲or▼
buttons to make a selection.
• Slide Show - automatically display all the pictures one at a time.
• Memory Source - select the image source between the built-in memory
or SD card.
• Delete - permanently remove the selected picture.