Touch button control panel – AVer SPC300+ User Manual
Page 17
E-11
English
繁體中文
日本語
ภา
ษาไ
ท
ย
Name
Button
Function
(25) EFFECT
Convert and display the image into BW, Negative or Color
when in Camera and Playback single preview mode.
(26) VISOR
Toggle to cover or uncover a part of the screen in camera
mode. Use the ▲,▼,◄,&► buttons to reveal the covered
part.
T
T
o
o
u
u
c
c
h
h
B
B
u
u
t
t
t
t
o
o
n
n
C
C
o
o
n
n
t
t
r
r
o
o
l
l
P
P
a
a
n
n
e
e
l
l
The touch button control panel located on the top side of AVerVision SPC300 provides quick
access to commonly used functions.
Name
Function
(1) POWER
Turn the unit in standby/on mode. To switch to standby mode, press and
hold the POWER button for 3 seconds. To switch on, press the POWER
button once.
(2) CAMERA MODE Display the image from the SPC300 built-in CMOS camera.
(3) PLAYBACK
MODE
Display the captured image either from the built-in memory or SD card
in 16-thumbnail preview. Use the ▲,▼,◄, &► buttons to make a
selection and ENTER to display the selected image in full screen.
In Playback Mode, press MENU to access the ff:
• SLIDE SHOW - start to automatically display from the selected image to the next one
and repeatedly display all the images in a loop.
To pause or resume slide show, press ENTER.
To manually move to the previous or next image, press ◄ or ►.
• MEMORY SOURCE - select the image source between the built-in memory or SD card.
• DELETE - permanently remove the selected image.
(4) SOURCE
Display the video signal from the RGB input port.
(5) MENU
Pull up and exit the OSD main-menu and sub-menu.
(6) LAMP
Turn the LED light on or off.
(7) CAPTURE
Capture a still image. The captured image is saved in the memory
source at 1024 x 768 resolution.
(8) ▲ ,▼, ◄, ►, &
ENTER
Use these buttons in Playback, Box, Pointer, Visor, Resize, Split
Screen, PIP function, and Menu to make a selection and adjustment
(See Menu Functions, for more details).
(9) ZOOM
SHUTTLE
- Zoom in and out the image 8X digitally in Playback and Box mode.
- Zoom in and out the image optically and digitally in Camera mode.
(10) FREEZE
Toggle to pause and resume the image from SPC300 built-in CMOS
camera.
(11) AF
Automatically adjust the focus.
(12) ROTATE
Turn the image by 90° each time this button is pressed in camera mode.