Cleveland Range (T) MKDL-125-T (-CC) - Manual (Page 25)

EMPTY EMPTY EMPTY EMPTY
EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY
MIN. FAST
9
8
7
6
5
4
3
2
1
SPEED CONTROL
L
I F
T
LEFT
KETTLE
RIGHT
KETTLE EMERGENCY
STOP OFF/AUTO OFF/AUTO
MIXER LIFT
OFF OFF
HEAT COOL HEAT COOL
MIX LIFT UP DOWN
MAIN
POWER
OFF ON
MOTOR WILL NOT START
UNLESS CONTROL IS AT "MIN."
KE95230-C
Contactor Cartridges Capacitor
INDEX
PART NO.
KE52074 KE603208-9 KE603208-8
1. Turn POWER switch ON.
2. Set required volume. Do not exceed kettle
capacity.
3. Locate delivery spout over desired kettle.
4. Press START switch downward to RESET.
Delivery will start at “0” and stop at preset volume.
5. To stop delivery any time, press INTERRUPT
switch downward.
6. To complete delivery after interrupting, press
START switch upward to CONTINUE.
7. Turn POWER switch to OFF when meter is not in use.
DIGITAL WATER METER
OPERATING INSTRUCTIONS
DISCONNECT FROM POWER
SUPPLY BEFORE SERVICING
BYPASSED ACTIVE
INTERRUPT START POWER
CONTINUE RESET OFF ON
KE95229-G
CONTROLLER
EMPTY
SWITCH
CONFIGURATION
NOTES:
*
For units built prior to December 2006, the complete
switch assembly must be ordered (see applicable
drawing).
Refer to Maintenance Section for Switch Disassembly
Instructions.
For Standard Direct Steam Mixer Kettles
*