Cleveland Range (T) MKDL-125-T (-CC) - Manual (Page 26)

Mixing
MIX LIFT
OFF
UP DOWN OFF
MIN. FAST
9
8
7 6 5 4 3
2
1
SPEED CONTROL
L I F T
Lifting & Lowering
Bridge
1. Turn MIX/LIFT SWITCH to "LIFT".
2. Turn MIXER SPEED CONTROL to
"MIN" and adjust to desired speed.
3. Turn and hold UP/DOWN SWITCH
"UP" to raise or "DOWN" to lower.
WARNING- Insure FAUCET SPOUT
is out of way before raising or lower-
ing bridge.
MIX LIFT
OFF
General Operation
1. Turn MAIN POWER SWITCH to
"ON".
OFF ON
BYPASS ACTIVE
Automatic Heating/
Cooling
NOTE: TEMPERATURE PROBE on
MIXER BRIDGE must be covered
ith i i f th i h f
HEAT AUTO COOL
OFF
HEAT AUTO COOL
OFF
Manual Heating/
Cooling
1. Turn ACTIVE/BYPASS SWITCH to
"BYPASS".
2. Turn CONTROLLER SWITCH to
"HEAT" or "COOL".
3. For heat: open STEAM VALVE
completely to boil, or adjust to
regulate temperature.
For cool: open STEAM VALVE
completely.
BYPASS ACTIVE
Water Meter
OFF ON Discharge Valve
EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY
INTERRUPT START
CONTINUE RESET OFF ON
EMPTY EMPTY EMPTY
OFF ON HEAT AUTO COOL
OFF
MAIN POWER
START
WATER METER
EMPTY EMPTY
CONTROLLER
BYPASS ACTIVE HEAT AUTO COOL
OFF
EMPTY
MIN. FAST
9
8
7
6
5
4
3
2
1
SPEED CONTROL
L
I F
T
MOTOR WILL NOT START
UNLESS CONTROL IS AT "MIN."
EMPTY EMPTY
MIXER LIFT
OFF OFF
MIX LIFT UP DOWN
KE95230-C
EMERGENCY
STOP
Contactor Cartridges Capacitor
INDEX
PART NO.
KE52074 KE603208-9 KE603208-8
SWITCH
CONFIGURATION
NOTES:
*
For units built prior to December 2006, the complete
switch assembly must be ordered (see applicable
drawing).
Refer to Maintenance Section for Switch Disassembly
Instructions.
For Cook Chill Direct Steam Mixer Kettles