AVer EB3004_MD User Manual
Page 15
Advertising
11
4. And then, insert the wire cable of the PTZ camera into the R+ and R- pin hole of the
RS232 to RS485 converter. Using the screwdriver to screw tight the wire cable.
6. And connect the video signal cable of the PTZ camera to BNC connector of the DVR.
Remember to connect all necessary power cables.
7. Please go to OSD menu to setup the PTZ camera. For configure detail, please refer to
PTZ Setup
of
Chapter 3.1
.
5. After PTZ camera has been setup, user should be able to see the live video on the
surveillance screen. To operate the PTZ camera on the surveillance screen, please
refer to
Chapter 2.1.2
.
Advertising