AVer EB3004_MD - Manual (Page 24)

20
2.3.1 Setup the Time Stamp
By enabling TIME STAMP function, current date and time could be displayed on each
channel screen to verify the recording date and time. Please follow the below steps to
enable TIME STAMP.
1. Press to call out OSD menu.
2. Using and to move the highlight to CAMERA/RECORD and press
to make a selection.
3. Select GENERAL and press to make a selection.
4. And then, select TIME STAMP by pressing button.
5. Using and to select the disable/enable of TIME STAMP and press
or to confirm.
GENERAL SETUP
RECORD MODE
TIME STAMP
DVR NAME
WATERMARK
AUTO RECORD
CIF
COMPANY
6. Press to exit from OSD menu.
7. The current date and time will display on upper right corner of each channel screen and
will be recorded.