AVer EB3004_MD - Manual (Page 37)

33
OSD MENU Description
STORAGE SETUP
HDD SIZE
HDD OVERWRITE
HDD USED
HDD FORMAT
953 , 849MB
279MB 0%
HDD OVERWRITE
Enable/disable replacing the earliest recorded file when the
hard disk space runs out. By default, the HDD overwrite setting
is enabled. If user has enable the PASSWORD SETUP in
SYSTEM SETUP, and then, a password entered is required
when change the HDD OVERWIRTE status. The default
password is 111111.
HDD SIZE
Display the total capacity of the hard disk.
HDD USED
Display the amount of space that has been used.
STORAGE SETUP
HDD SIZE
HDD OVERWRITE
HDD USED
HDD FORMAT
953 , 849MB
279MB 0%
HDD FORMAT
For security purpose, you may have to enter the password to
format hard disk (The default password is 111111).
To format hard disk:
1. Use the and buttons to go up and
down and select HDD FORMAT. Then press .
2. In the CHECK PASSWORD screen, press . Then
use and buttons to select the
security combination number. Press button again to make
the selection.
3. To move the selection to the left and right, use , and
buttons.
CHECK PASSWORD
ENTER PASSWORD
EXECUTE
4. After entering the last number, the “PASSWORD
CORRECT” appears, you are now authorized to format the
hard disk.
5. It is done when the “FORMAT DISK SUCCESS” appears.
Formatting the hard disk will permanently delete all
the recorded files. The recorded files will be no longer
for retrieving.