AVer EB3004_MD - Manual (Page 26)

22
4. And then, select SEARCH AREA to mark an area to
search. Use the , , , and to
move the block and press or to confirm.
To exit, press .
5. To start searching, select the SEARCH EXECUTION.
6. After make a selection, the DVR system will start
playback automatically.
SEARCH AREA SETUP SCREEN
Listed below are the symbols of recording condition that will display on surveillance screen while playback
mode and record mode:
A – Always Recording
It records non-stop and automatically continue recording when interrupted.
L – Alarm Recording
It records when the alarm has activated.
B – Button Recording
It records when the record button is pressed.
The “” play symbol would appear beside the channel number when you are in playback mode.