2 controlling ptz camera – AVer EB3004_MD User Manual
Page 19
Advertising
15
2.1.2 Controlling PTZ Camera
Using remote control, user can easily control PTZ camera at local site. Before starting,
make sure the PTZ camera is connected with the DVR unit (see also
Chapter 1.5.4
) . And
then, please go to OSD menu to enable PTZ control (see also
PTZ Setup
of
Chapter 3.1
).
i
Use the RS-232 to RS-485 converter to connect the PTZ camera with the DVR unit(see
also
Chapter 1.5.4
).
2.1.2.1 To Enter the PTZ Mode
To control PTZ camera, user need to enter the PTZ mode first. Press
button, and
camera channel number button (
)
. The surveillance monitor will switch to
single screen PTZ mode.
To exit PTZ mode, press
button. Also, when the DVR system is idle over 1 minute,
the DVR system will automatically exit PTZ mode.
Advertising