Salter Brecknell SBI100 - Manual (Page 6)

4 SBI 100 User Instructions Manual
1.2 Warnings
Avoid lengthy exposure to extreme heat or cold. Your scale works best when operated
at normal room temperature. Always allow the scale to acclimate to a normal room
temperature before use.
1.2.1 Electrical Installation
The mains lead must be connected to a supply outlet with a protective earth contact.
The electrical supply at the socket outlet must provide over current protection of an
appropriate rating.
For your protection all mains (110V or 230V) equipment used out of doors or in wet or
damp conditions should be supplied from a correctly fused source and protected by an
approved ground fault protection device (RCD, GFCI etc.)
IF IN DOUBT SEEK ADVICE FROM A QUALIFIED ELECTRICIAN.
1.2.2 Routine Maintenance
CAUTION!
THE EQUIPMENT CONTAINS NO USER SERVICEABLE COMPONENTS.
Installation and maintenance of the equipment must only be carried out by
trained and authorised personnel.
IMPORTANT: This equipment must be routinely checked for proper operation
and calibration.
Application and usage will determine the frequency of calibration required for
safe operation.
ELECTRICAL WARNING!
TO AVOID THE POSSIBILITY OF ELECTRIC SHOCK OR DAMAGE TO
THE MACHINE, ALWAYS SWITCH OFF THE MACHINE AND ISOLATE
FROM THE POWER SUPPLY BEFORE CARRYING OUT ANY ROUTINE
MAINTENANCE.
TO AVOID THE RISK OF THE MACHINE FALLING, WHERE
APPLICABLE, ENSURE THAT IT IS PLACED SECURELY ON A FLAT
AND LEVEL SURFACE.