CASO Germany SlimLine 2000 - Manual (Page 49)

caso SlimLine 2000 49
12.5 Setup
12.5.1 Setup location requirements:
In order to ensure the safe and trouble-free operation of the
device, the setup location must fulfil the following prerequisites:
• The appliance must be positioned on a solid, even, horizontal
and heat-resistant base with sufficient load-supporting capacity
for the appliance itself plus the heaviest anticipated cooking
contents.
• The induction cooktop must not be operated on a base with an
iron or steel content, as this can heat up considerably.
• Select an installation location where children cannot reach the
appliance’s hot surface.
• The appliance is not intended as a built-in appliance.
• Do not set up the device in a hot, wet or extremely damp
environment or near flammable material.
• Do not set up the induction cooktop in the vicinity of appliance
and objects which react sensitively to magnetic fields (e.g.:
Radios, televisions, cassette recorders, etc.).
• To operate correctly, the appliance requires a sufficient flow of
air. Leave a 10 cm gap on all sides when setting up the
appliance.
• The cool air is drawn in by the underside of the appliance. Do
not cover or block any of the appliance’s openings.
• The electrical socket must be easily accessible so that the
power lead can be disconnected easily, in the case of an
emergency.
• The installation and assembly of this device in non-stationary
setup locations (e.g. on ships) must be carried out by specialist
companies / electricians, provided they guarantee the
prerequisites for the safe use of this device.