CASO Germany VC 220 Vacuum Set - Manual (Page 43)

caso Vakuumierer VC220
43
7. Connect the hose connector for the VC220 (A3) at
the VC220 an.
8. Firmly press the adapter vacuum
extractor (A7) on the valve of the zip bag
(A4). Please firmly press the adapter during
the whole process on the valve of the zip
bag.
9.
Press the button container-vacuum
(Behälter Vakuum) at the VC220. Air is
drawn.
10. The process ends automatically.
11. Remove the hose-connector from the VC220.
14.6 Making a bag using the bag roll
1. Unroll the bag to the desired length and cut the bag to the appropriate length with
precise and clear cut.
2. Open the lid and put one end of the bag on top of the black rubber strip, then close the
cover (see Step 1).
3. Press the cover down heavily on both sides by using two hands until two click sounds
heard (see Step 2).
4. Press the “Schweißen”-Button (B) and the corresponding LED control light starts
flashing.
5. When the LED light turns off, the bag is sealed.
6. Now you have a custom-sized bag.
Please note
►
Make sure that the bag you want to use is at least 8cm/3.1in. longer than the food.
Add another 2 cm/0.8in. each time the bag is re-used.