Detex EA-2500 - Manual

INSTALLATION INSTRUCTIONS FOR THE EA-2500 EXIT ALARM (POLYMER CASE)
Detex Corporation, 302 Detex Drive, New Braunfels, Texas 78130 (830) 629-2900 / 1-800-729-3839 / FAX (830) 620-6711
E-Mail: [email protected] Internet: www.detex.com
WARRANTY
The Detex Security hardware product you have purchased is warranted to be free of defects in material and workmanship when properly
installed, used and maintained according to instructions. We will, for a period of one (1) year from the date of purchase, repair or replace
any part which, upon our examination, proves to be defective under normal use. This does not apply to batteries or to damage from battery
leakage. This warranty will be honored only upon presentation of proof that the product covered thereby was purchased directly from
an authorized Detex Distributor. WE SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL LOSS
OR DAMAGE ARISING OUT OF THE FAILURE OF THIS DEVICE.
DETEX INS2500 PAGE 1
FIG. 3.- MONITORING TWO DOORS WITH ONE ALARM
SEE PAGE 5 FOR WIRING
EQUIVALENT METRIC DIMENSIONS
ENGLISH MILLIMETERS ENGLISH MILLIMETERS
1/8" 3 7/8" 22
1/4" 6 1" 25
5/16" 8 1-1/4" 32
3/8" 10 1-9/16" 40
1/2" 13 1-3/4" 44
5/8" 16 3-3/4" 95
3/4" 19 8-3/4" 222
E:\PM4\TABLES\METRICS.TBL
®
FIG. 2 FLUSH MOUNT
IN-WALL WIRING
FIG. 1 SURFACE MOUNT
SURFACE WIRING
NOTE: The EA-2500 can be in-
stalled on either side of the door.
INS-2500/PM MAY 2, 2001