Dynojet 224x: Installation Guide - Manual (Page 26)

Above Ground Model 224 Automotive Dynamometer Installation Guide
C H A P T E R 2
Dyno Installation
2-6
I NSTALLING THE D RUM G UARDS
You will need the following parts:
• 21216101 Right Drum Guard
• 21216102 Left Drum Guard
• 21216103 Lateral Drum Guard (2)
• 36582034 Bolt, 3/8-16 x 1.25", Button-Head, Flange, Allen (8)
1 Secure the left and right drum guards using one 3/8-16 x 1.25-inch button-head
flange bolt each.
2 Secure the front lateral drum guard using five 3/8-16 x 1.25-inch button-head
flange bolts.
3 Loosely attach the rear lateral drum guard using the center 3/8-16 x 1.25-inch
button-head flange bolt only.
Figure 2-3: Install the Drum Guards
front drum guard
right drum guard
left drum guard
rear drum guard