Dynojet 224x: Installation Guide - Manual (Page 44)

Above Ground Model 224 Automotive Dynamometer Installation Guide
C H A P T E R 3
Loading the Vehicle
3-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LOADING THE VEHICLE
Use the following steps to load a vehicle on the dyno. Refer to your lift instructions for
lift operation.
You will need the following parts:
part description part description
short axle strap, 10M #,
21" (4)
P/N 30AS21
car tie-down, high
performance, 2" x 10" (2)
P/N 500-C10W
long axle strap, 10M #,
6" (4)
P/N 30AS72
inductive secondary
pickup (2)
P/N DE100-109S
car tie-down, 2" x 10" (4)
P/N 500-C10
inductive primary pickup
P/N DE100-110L