Dynojet 248x: Installation Guide - Manual (Page 10)

1 - 6 Document #98219101
Uncrating the Dyno
Step 1
Use a crowbar or the like to remove the
plywood shipping shell from the
dynamometer.
• Remove catwalk pallet from the top of the
crate (if purchased).
• Remove the top of the crate.
• Remove the sides of the crate.
• Remove the bottom skids and discard.
Step 2
Remove the front and back dyno covers.
Step 3
Carefully remove the cardboard boxes and
brake weldments that are stored within the
dynamometer’s frame.