Dynojet 424x: Installation Guide - Manual (Page 66)

In Ground Model 424x/424xLC 2 Automotive Dynamometer Installation Guide
C H A P T E R 3
Hydraulic Movement Installation
3-30
W IRING THE H YDRAULIC M OTOR
Verify the motor is wired for your needs. The motor is wired for 110v but can be
changed to 220v.
1
Remove the wiring box cover.
2 Follow the instructions on the cover to wire the motor for 220v.
Figure 3-20: Wiring the Hydraulic Motor
AD393
wiring box cover