Dynojet 424x: Installation Guide - Manual (Page 77)

4 W D D Y N O I N S T A L L A T I O N
Bridge Installation—4WD Dyno
Version 7 In Ground Model 424x/424xLC 2 Automotive Dynamometer Installation Guide
3-41
I NSTALLING THE D RUM G UARDS
1 Secure the shorter left and right drum guards using one 3/8 x 1.25-inch button-
head bolt each.
Note: These drum guards are shorter than the left and right drum guards for the
stationary dyno and must be mounted on the 4WD dyno.
2 Secure the rear drum guard using the center 3/8 x 1.25-inch button-head bolt.
Figure 3-28: Installing the Drum Guards
AD384
rear drum guard
left drum guard
right drum guard