Glazing pocket identification in verticals, Step 3) glazing pocket identification in verticals – EFCO 525 Series User Manual
Page 39
Advertising
[FIG. 62]
SECTION IX - GLAZING
[FIG. 59]
[FIG. 60]
[FIG. 61]
DPS 1/2004
PAGE 37
(CONT.)
DEEP
4477
4478
DEEP
4480
DEEP
4476
DEEP
SHALLOW
TRANSOM
GLAZING
STOPS
4481
STEP 3) GLAZING POCKET IDENTIFICATION IN
VERTICALS
As instructed in figures 10 and 11 on pages 13 and 14, ensure that each
vertical DLO has at least one DEEP glass pocket on either side. It is
necessary for the glazing installation that a deep pocket be used to load
the glazing units. One exception is the applied transom glazing stops.
The applied stops do not require the glass to be loaded into a deep
pocket. These details are shown with the deep glazing pockets shown
right justified for viewing clarity.
SHALLOW
525 IMPACT
Advertising