Sealing the sill onto the subsill, X door frames, Fig. 25 – EFCO 945 Series User Manual
Page 27: Fig. 24, Step 1) sealing the sill onto the subsill
Advertising
Apply a silicone type sealant to the subsill in the location shown in Figure 24
before installing the first ladder. Make sure that enough sealant is applied to seal
the areas shown in Figure 25. After installing the ladder and anchoring it, clean off all
excess sealant.
SEALANT
SEALANT
SEALANT
SEALANT
[FIG. 25]
2G22
BAB 11/2000
8344
[FIG. 24]
2G22
SECTION VIII - INSTALLATION
STEP 1) SEALING THE SILL ONTO THE SUBSILL
INCLUDES CAPTURED AND STRUCTURAL GLAZED MULLION SYSTEMS
PAGE 25
Advertising