ETS-Lindgren HI-6113 Laser Data Interface and Probe Measurement System - Manual (Page 33)

ProbeView Laser Software | 33
Probe Status Screen Description
Sam/Sec Samples per second.
Log Cnt
Total number of data points that have been
logged or recorded.
Log
A red icon indicates that data is being recorded.
Normal operation is gray.
Prb Tem Internal temperature of the probe.
Las Cur Laser Current
Las Tem Laser Temperature
Con Volt Converter Voltage
Communication Status
Communication
Status
Description
No Probe Probe is not connected properly or there is a
problem with the fiber.
F IELD I NTENSITY
The total field strength or power density is shown at the top in the large font. In a
non-squared unit, this reading is the square root of the sum of the squares of the
X, Y, and Z axes. The orthogonal components for the X, Y, and Z axes are
displayed in a smaller font.