ETS-Lindgren HI-6113 Laser Data Interface and Probe Measurement System - Manual (Page 45)

Operating Protocols | 45
Command Description Response
I Identification command :I6105<sr><sn><cd>B<CR>
 sr=10-character software
revision
 sn=8-character serial
number
 cd=8-character calibration
date
 B=battery flag, N or F
The Identification command, I, may also be used as the first command
sent. The command will turn on the laser. Once communication
between the probe and the HI-6113 is established, the return string
will be sent. Subsequent I commands immediately send the return
string.
Command Description Response
TC Read temperature in
Centigrade
:Txxxx.<CR>
TF Read temperature in
Fahrenheit
:Txxxx.<CR>
<Null><CR> Send the ASCII null
character
:N<CR>
<Null><CR> is a special command that can be used as the initial
command to the Field Probe after it is turned on.