ETS-Lindgren HI-3550 Magnetic Field Monitor (Archived) - Manual (Page 10)

HI n 3550 Manual Page — 5
3.0 UNPACKING AND ACCEPTANCE
Introduction
This section contains information on the procedure for
the unpacking and acceptance of the HI n 3550.
Unpacking and Acceptance
Step 1. Upon delivery of your order, inspect the
shipping container(s) for evidence of damage.
Record any damage on the delivery receipt
before signing. In case of concealed damage
or loss, retain the packing materials for
inspection by the carrier.
Step 2. Remove the instrument from its shipping
container. Save the boxes and any protective
packing materials for future use.
Step 3. Check all materials against the packing list to
verify that the equipment received matches
that which was ordered. If you find any
discrepancies, note them and call Holaday
Customer Service for further instructions.
Be sure that you are satisfied with the contents of your
order and the condition of your equipment before using
the instrument.
Archived 4/2/10