Mounting the shifter – Karcepts KSM01 User Manual
Page 11
Advertising
3. MOUNTING THE SHIFTER
1. Re-attach the rear mount bracket following step 9, from
MODIFYING YOUR
CHASSIS
. Apply a liberal amount of the silicone sealant to the gaps of the
inside of the rear mount bracket as shown.
2. Attach RSX cables to your factory RSX shifter box.
If using a JDM shifter box, follow steps 3 & 4, skipping step 5; for a
USDM shifter box, skip steps 3 & 4 and continue onto step 5.
3. Remove the pressed in metal inserts from the JDM shifter box.
Advertising