Kontron NetBootLoader - Manual (Page 42)

ID 1022-8317, Rev. 2.0
Command Syntax NetBootLoader
Page 34
DESCRIPTION: Programming the NetBootLoader:
• from the data buffer to the active NBL Flash:
clone -n -a
• from the inactive NBL Flash to the active NBL Flash:
clone -a
• from the data buffer to the inactive NBL Flash:
clone -n
• from the active NBL Flash to the inactive NBL Flash:
clone
USAGE: Program NetBootLoader to the inactive NBL Flash
COMMAND / RESPONSE:
NetBtLd> clone -n
clone: Fixup FLASH info from ftp buffer
This will overwrite the current
... NetBootLoader in the fallback flash, are
... you sure? [no] yes
clone: System transferred to fallback flash
NetBtLd>
Note: When responding to the overwrite query, “yes” must be spelled
out. Any other response will terminate the cloning operation.
Program NetBootLoader (image not valid)
COMMAND / RESPONSE:
NetBtLd> clone -n
clone: Fixup FLASH info from ftp buffer
Image length invalid, image is damaged,
abort.
NetBtLd>
CLONE (Two NBL Flashes)