Kontron NetBootLoader - Manual (Page 60)

ID 1022-8317, Rev. 2.0
Command Syntax NetBootLoader
Page 52
MD
FUNCTION: Display visible memory
SYNTAX:
md [<adr>]
where:
md command
<adr> parameter: hexadecimal
<[x … ]x>
starting address of a visible memory area
DESCRIPTION: To display a visible memory area the command MD is used. The first
time the command MD is issued, visible memory contents starting at
the address 0x0 are displayed if no “<adr>” parameter is used. If
issued again without the “<adr>” parameter, the display starts with
the end address of the previous display. Data is displayed as
hexadecimal 32-bit words and as ASCII dump.