Kontron NetBootLoader - Manual (Page 81)

ID 1022-8317, Rev. 2.0
Command Syntax NetBootLoader
Page 73
SPEED
FUNCTION: Enables or disables fast booting
SYNTAX:
speed [<switch>]
where:
speed command
<switch> parameter: numeric string
0, 1
when set to 0 (zero) disables “fast” boot mode
when set to 1 (one) enables “fast” boot mode
when not specified, displays current setting
DESCRIPTION: This command is used to specify to the NetBootLoader that either the
complete booting process is to be performed or that a shortened boot
process is to be performed.
During the shortened boot process, network initialization is not
performed, and CRC checking of the userimage is not performed.
USAGE: Enable “fast” booting
COMMAND / RESPONSE:
NetBtLd> speed 1
Display the current setting
COMMAND / RESPONSE:
NetBtLd> speed
Speed mode : "fast" boot up process.