Command syntax netbootloader, Net (amc) – Kontron NetBootLoader User Manual
Page 66
Advertising

ID 1022-8317, Rev. 2.0
Command Syntax
NetBootLoader
Page 58
NET
(AMC)
FUNCTION:
Set or display the parameters for an Ethernet port
SYNTAX:
net [<num_net>] [<ip-addr>]
… [-netmask <netmask>] [-gw <gateway>]
… [-a] [-f]
where:
net
command
<num_net>
parameter: numerical string
0, 1 ... n
logical identifier of Ethernet port addressed by this
command
where: 0 = TSEC1
1 = TSEC2
2 = TSEC3
3 = TSEC4
<ip-addr>
parameter: string
<nnn.nnn.nnn.nnn>
IP address of NetBootLoader
-netmask
option: netmask
<netmask>
parameter: string
<nnn.nnn.nnn.nnn>
netmask of NetBootLoader
-gw
option: gateway
<gateway>
parameter: string
<nnn.nnn.nnn.nnn>
gateway address for network
-a
option:
specifies that the NetBootLoader is to use this port
for network operations
-f
option:
force CRC update
Advertising