Command syntax netbootloader, Login, Logout – Kontron NetBootLoader User Manual
Page 58
ID 1022-8317, Rev. 2.0
Command Syntax
NetBootLoader
Page 50
LOGIN
FUNCTION:
Initiate FTP server session
SYNTAX:
login <ip-of-host> <username> [<password>]
where:
login
command
<ip-of-host>
parameter: string
<nnn.nnn.nnn.nnn>
IP address of host
<username>
parameter: string
<[x … ]x>
FTP server user name
<password>
parameter: string
<[x … ]x>
user’s password
DESCRIPTION:
The command LOGIN is used to establish an FTP server session.
The “<password>” parameter is not necessary if the server does not
require one.
USAGE:
Initiate FTP server session
COMMAND / RESPONSE:
login 192.168.47.12 johndoe mypassword
(Response is dependent on the server accessed)
LOGOUT
FUNCTION:
Terminate telnet session with NetBootLoader
SYNTAX:
logout
DESCRIPTION:
A remote telnet session will be terminated with the command
LOGOUT. No image is loaded and started if the session is
terminated with LOGOUT. The NetBootLoader waits for a new
session to be initiated or for a command entry from the serial
console.