Command syntax netbootloader, Pwd (ftp), Pwd, pwdcf (nand flash) – Kontron NetBootLoader User Manual
Page 72
ID 1022-8317, Rev. 2.0
Command Syntax
NetBootLoader
Page 64
PUT
FUNCTION:
Upload contents of the data buffer to the FTP server
SYNTAX:
put <filename>
where:
put
command
<filename>
parameter: string
<x … x>
file name to be used for contents of data buffer to
be uploaded
DESCRIPTION:
To upload the contents of the data buffer (of the currently specified
core) to a file on an FTP server, the command PUT is used. The file
indicated by the parameter “<filename>” is created on the server. In
the event that a file with this name already exists, its contents will be
overwritten.
PWD
(FTP)
FUNCTION:
Display the current FTP server directory path
SYNTAX:
pwd
DESCRIPTION:
If an FTP connection has been established with the LOGIN
command, the command PWD is used to display the complete path
of the current directory on the FTP server.
PWD, PWDCF (NAND Flash)
FUNCTION:
Display the current NAND Flash directory path
SYNTAX:
pwd, pwdcf
DESCRIPTION:
To access the NAND Flash when logged on to an ftp server, use the
command PWDCF.