Casio XJ-450 - Manual (Page 121)

Troubleshooting
121
POWER : Amber flashing
J
Red steady
Power has turned off automatically due to a lamp
problem.
After confirming that the POWER/STANDBY
indicator is lit red, unplug the AC power cord,
then plug it back in and turn on the projector
again. If this does not correct the problem, wait
for the projector to cool down and then check the
lamp cartridge for damage. If there is nothing
wrong with the lamp cartridge, take it to your
original dealer or authorized CASIO Service
Center.
TEMP : Red flashing
(0.5-second interval)
LAMP : Red flashing
(0.5-second interval)
POWER : Amber flashing
J
Red steady
Power has turned off automatically because the
lamp cover is open. Perform the following steps.
1
After confirming that the POWER/STANDBY
indicator is lit red, unplug the AC power cord
and wait for about 60 minutes to allow the
projector to cool down.
2 Close the lamp cover.
) “To replace the lamp” (page 114).
3
Plug the AC power cord back in, and turn on
the projector again.
TEMP : Amber flashing
POWER : Amber flashing
J
Red steady
Internal memory error.
After confirming that the POWER/STANDBY
indicator is lit red, unplug the AC power cord, wait
for about 60 minutes to allow the projector to cool
down, and then take it to your original dealer or
authorized CASIO Service Center.
TEMP : Red flashing (2-second
interval)
POWER : Green steady
U
It is time to replace the lamp.
Replace the lamp following the steps under
“Replacing the Lamp” on page 111.
LAMP : Red flashing
(1-second interval)
POWER : Amber flashing
J
Red steady
The allowable life for the lamp has been
exceeded, and the projector will not turn on.
Replace the lamp following the steps under
“Replacing the Lamp” on page 111.
LAMP : Red steady
Indicator Alert Description