Casio XJ-450 - Manual (Page 70)

70
Using the Setup Menu
6.
Change the setting or select an option to configure the currently
selected sub-menu item.
z The operation you need to perform depends on the sub-menu item type. See “Setup
Menu Overview” on page 64 for more information.
z For information about how to configure settings for each sub-menu item, see “Sub-menu
Operations” on page 70.
z After configuring the settings of one sub-menu item, you can repeat steps 5 and 6 to
select another item on the same sub-menu and configure its setting.
z If you want to configure the settings of another main menu item, press the [ESC] key
to exit the current sub-menu. Next, repeat steps 3 through 6 to select another main
menu item and change the settings of its sub-menu.
7.
Press the [MENU] key to exit the setup menu.
z This causes the setup menu to disappear from the projected image.
Sub-menu Operations
This section explains steps you need to perform in order to configure settings for each sub-
menu item type (value, selection, setting screen, execution, information).
Value Setting Type Sub-menu Item
This type of sub-menu item consists of a value and a bar graph.
Examples: Image Adjustment
J Brightness; Screen Settings J Vertical Keystone
Correction
Operation: Press the [
W] key to make the value smaller, or the [X] key to make it
larger. A value can be selected within the range that the indicator is able
to move within the selected bar. Depending on conditions, the indicator may
not move all the way to either end of the bar.